Jotech Nice Velvet

Description & field of application

Specially formulated water based, eco-friendly, washable material designed to give the surface velvet effects and simulate prestigious architecture.

Main features

Physical specifications

Specific gravity: approx. 1.14 g/cc 2)
Sold by volume: approx. 29 %
Coverage rate: 8-10 m2/liter
Dry film thickness: 30 microns
Shelf life: 12 months
Flash point: not applicable
Finish: gloss
Drying time at 25 degrees Celsius. Surface dry approx. 2-3 hours, hard dry approx. 10-14 hours

Surface preparations
The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint or powdery materials.

Remove the old paint as much as possible

Sand the entire surface and remove all the dust

Wash down the diluted ammonia solution

Rinse with clean water and allow to dry

Prime the surface to be painted with Jotech PVA primer

Fill cracks and holes with Jotech stucco filler

After drying, sand the putty and clean the surface once again

Apply two coats of Jotech nice velvet by using a roller or trowel

Sand the surface until completely smooth, remove all the dust

Prime the surface to be painted with Jotech PVA primer

Apply 1-2 coats of Jotech stucco filler

After drying, sand the putty and clean the surface

Apply two coats of Jotech nice velvet by using roller or trowel

Instructions for use

Airless spray gun
Type of thinner: clean water
Percentage of thinning: 10-15 % max. by volume
Nozzle orifice: .015”-.018”
Output pressure: 120-140 bars
Brush / roller
Type of thinner: clean water
Percentage of thinning: 10-2- % max. by volume
Color: see Jotech color shade catalogue
Packaging: 5 US gallons, 1 US gallon

Remarks

Stir well before use
Avoid application below 5 c or over 85 % relative humidity
After painting, clean the application tools immediately with water
Close container after use
Store in a cool and dry place
Keep out of reach of children
For more information, please do not hesitate to contact our technical department.